Boilers & Incinerators

Gasifier

With a strong foundation from years of project experience including modern biomass-fired gasifiers in Europe’s Nordic region, Calderys offers cutting-edge refractory solutions for Gasifiers including the latest sol-gel bond technology to save you heating-up time. 

The high pressure and severe conditions of your equipment will be no match for the Calderys offering we will customise for you (for any feedstock: biomass, coal, or waste) – from products to full turnkey service offerings, we provide it all.

Gasifier A<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier B<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier C<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier D<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier E<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier F<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier_G<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier H<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier I<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier J<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier K<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>

Gasifier L<p>Calderys tailors its hotface refractory recommendations to your gasifier operating conditions – please note that highly abrasive conditions may require steel needles for best performance.<br />
Hotface examples:</p>

<ul>
	<li>CALDE® FLOW LF 50 A</li>
	<li>CALDE® CAST 60 </li>
	<li>CALDE® SPRAYCAST LM 74 A or LF 50 A </li>
	<li>CALDE® SOL SPRAYCAST M 74 A or F 50 A</li>
</ul>

<p>Option when sand or other abrasive used:</p>

<ul>
	<li>CALDE® CAST LM 74 A including 3% steel needles SS 310 (can be omitted if more than 100mm hotface thickness)</li>
</ul>
<p>High quality insulators recommended, such as: </p>

<ul>
	<li>CALDE® CAST LW MIX 124 C/G </li>
	<li>CALDE® CAST XL 140 CO</li>
</ul>