Cement

Calciner

Refractories installed in a calciner are facing severe conditions. A high thermal load in the burner area requires respective materials. The presence of alkalis, chlorine, and sulphur leads to the selection of corrosion-resistant products.

Click on the 3D drawing below to learn more about the Calderys offering for the calciner.

Get in touch with our specialists to receive a customised solution for your needs.

Calciner A<p>Calderys has developed efficient and reliable solutions for the hot area / riser<br />
duct with positive behavior against chemical corrosion (e.g. alkali, chlorine).<br />
Our andalusite based refractories are very well suited for this aggressive<br />
environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area,<br />
hence the refractory solutions are also based on andalusite materials. For<br />
geometrical reasons monolithic solutions are preferred for this part of the<br />
equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best<br />
approached by fireclay / chamotte based refractory materials. We offer a number of<br />
solutions but the most efficient installation is done with a combination of bricks<br />
and monolithics.</p>

Calciner B<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics. </p>

Calciner C<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics. </p>

Calciner D<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics. </p>

Calciner E<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics. </p>

Calciner F<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics. </p>

Calciner G<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.<br />
 </p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics.</p>

Calciner H<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics.</p>

Calciner I<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics.</p>

Calciner J<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics.</p>

Calciner K<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics. <br />
 </p>

Calciner L<p>Calderys has developed efficient and reliable solutions for the hot area / riser duct with positive behavior against chemical corrosion (e.g. alkali, chlorine). Our andalusite based refractories are very well suited for this aggressive environment. We supply any combination of monolithic and brick solutions.</p>
<p>The working conditions in the gooseneck are very similar to those in the hot area, hence the refractory solutions are also based on andalusite materials. For geometrical reasons monolithic solutions are preferred for this part of the equipment.</p>
<p>Lower temperature, mechanical and chemical stress in the falling duct are best approached by fireclay / chamotte based refractory materials. We offer a number of solutions but the most efficient installation is done with a combination of bricks and monolithics. <br />
 </p>