Primary Aluminium

Casthouse Holding Furnace

With our extended range of monolithic refractory and expert teams, Calderys accompanies you to select the best refractory solutions for your casthouse aluminium holding furnace (also known as primary tank furnace). Our solutions are proven worldwide in furnaces up to 160 tonnes of capacity. Our goal is to provide peace of mind to the production team with proven quality refractory linings and high thermal insulation performance. Corrosion at the metal line from aluminium alloys and salts, mechanical erosion of the bottom hearth, metal contamination and degradation of door jambs and lintel are typical concerns Calderys will solve together with you. From fast repairs to full furnace refractory relining, contact us.

Casthouse Holding Furnace A<ul>
	<li>CALDE® CAST MM 55: reference solution when protected by steel plates</li>
	<li>CALDE® CAST LX 58 otherwise</li>
	<li>CALDE® WIRE MIX: in precast shapes for great durability against mechanical abuse and thermal shocks, replacing metal protective plates.</li>
</ul>
<ul>
	<li>CALDE® PLAST P 85 or ALKON® GUN P: P-bond plastic material reference</li>
	<li>ALKON® GUN C 75: versatile solution</li>
	<li>CALDE® CAST LX 58: casting solution</li>
</ul>

<p>To check if the quarl is subject to aluminium projections and flame rebounds.</p>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>
<ul>
	<li>CALDE® CAST XL 140, 116 or 106 C/G: references with different stability/insulation; performance compromise to be found.</li>
</ul>

<p>Metallic or ceramic anchors and preferably a combination adapted to furnace mobility, roof shape, hanging supports and roof accessibility.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>ALKON® GUN F 50 gunning solution</li>
	<li>CALDE® CAST ML 55 S5/ GUN MM 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less severe environment</li>
</ul>

<p>Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>

 Casthouse Holding Furnace B<ul>
	<li>CALDE® CAST MM 55: reference solution when protected by steel plates</li>
	<li>CALDE® CAST LX 58 otherwise</li>
	<li>CALDE® WIRE MIX: in precast shapes for great durability against mechanical abuse and thermal shocks, replacing metal protective plates.</li>
</ul>
<ul>
	<li>CALDE® PLAST P 85 or ALKON® GUN P: P-bond plastic material reference</li>
	<li>ALKON® GUN C 75: versatile solution</li>
	<li>CALDE® CAST LX 58: casting solution</li>
</ul>

<p>To check if the quarl is subject to aluminium projections and flame rebounds.</p>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>
<ul>
	<li>CALDE® CAST XL 140, 116 or 106 C/G: references with different stability/insulation; performance compromise to be found.</li>
</ul>

<p>Metallic or ceramic anchors and preferably a combination adapted to furnace mobility, roof shape, hanging supports and roof accessibility.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>ALKON® GUN F 50 gunning solution</li>
	<li>CALDE® CAST ML 55 S5/ GUN MM 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less severe environment</li>
</ul>

<p>Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>

<p> </p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>

Casthouse Holding Furnace C<ul>
	<li>CALDE® CAST MM 55: reference solution when protected by steel plates</li>
	<li>CALDE® CAST LX 58 otherwise</li>
	<li>CALDE® WIRE MIX: in precast shapes for great durability against mechanical abuse and thermal shocks, replacing metal protective plates.</li>
</ul>
<ul>
	<li>CALDE® PLAST P 85 or ALKON® GUN P: P-bond plastic material reference</li>
	<li>ALKON® GUN C 75: versatile solution</li>
	<li>CALDE® CAST LX 58: casting solution</li>
</ul>

<p>To check if the quarl is subject to aluminium projections and flame rebounds.</p>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>
<ul>
	<li>CALDE® CAST XL 140, 116 or 106 C/G: references with different stability/insulation; performance compromise to be found.</li>
</ul>

<p>Metallic or ceramic anchors and preferably a combination adapted to furnace mobility, roof shape, hanging supports and roof accessibility.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>ALKON® GUN F 50 gunning solution</li>
	<li>CALDE® CAST ML 55 S5/ GUN MM 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less severe environment</li>
</ul>

<p>Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>

<p> </p>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>

Casthouse Holding Furnace D<ul>
	<li>CALDE® CAST MM 55: reference solution when protected by steel plates</li>
	<li>CALDE® CAST LX 58 otherwise</li>
	<li>CALDE® WIRE MIX: in precast shapes for great durability against mechanical abuse and thermal shocks, replacing metal protective plates.</li>
</ul>
<ul>
	<li>CALDE® PLAST P 85 or ALKON® GUN P: P-bond plastic material reference</li>
	<li>ALKON® GUN C 75: versatile solution</li>
	<li>CALDE® CAST LX 58: casting solution</li>
</ul>

<p>To check if the quarl is subject to aluminium projections and flame rebounds.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>ALKON® GUN F 50 gunning solution</li>
	<li>CALDE® CAST ML 55 S5/ GUN MM 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less severe environment</li>
</ul>

<p>Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>
<ul>
	<li>CALDE® CAST XL 140, 116 or 106 C/G: references with different stability/insulation; performance compromise to be found.</li>
</ul>

<p>Metallic or ceramic anchors and preferably a combination adapted to furnace mobility, roof shape, hanging supports and roof accessibility.</p>

Casthouse Holding Furnace E<ul>
	<li>CALDE® CAST MM 55: reference solution when protected by steel plates</li>
	<li>CALDE® CAST LX 58 otherwise</li>
	<li>CALDE® WIRE MIX: in precast shapes for great durability against mechanical abuse and thermal shocks, replacing metal protective plates.</li>
</ul>
<ul>
	<li>CALDE® PLAST P 85 or ALKON® GUN P: P-bond plastic material reference</li>
	<li>ALKON® GUN C 75: versatile solution</li>
	<li>CALDE® CAST LX 58: casting solution</li>
</ul>

<p>To check if the quarl is subject to aluminium projections and flame rebounds.</p>
<p> </p>

<ul>
	<li>CALDE® CAST XL 140, 116 or 106 C/G: references with different stability/insulation; performance compromise to be found.</li>
</ul>

<p>Metallic or ceramic anchors and preferably a combination adapted to furnace mobility, roof shape, hanging supports and roof accessibility.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>ALKON® GUN F 50 gunning solution</li>
	<li>CALDE® CAST ML 55 S5/ GUN MM 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less severe environment</li>
</ul>

<p>Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>

Casthouse Holding Furnace F<ul>
	<li>CALDE® CAST MM 55: reference solution when protected by steel plates</li>
	<li>CALDE® CAST LX 58 otherwise</li>
	<li>CALDE® WIRE MIX: in precast shapes for great durability against mechanical abuse and thermal shocks, replacing metal protective plates.</li>
</ul>
<ul>
	<li>CALDE® PLAST P 85 or ALKON® GUN P: P-bond plastic material reference</li>
	<li>ALKON® GUN C 75: versatile solution</li>
	<li>CALDE® CAST LX 58: casting solution</li>
</ul>

<p>To check if the quarl is subject to aluminium projections and flame rebounds.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less severe environment</li>
</ul>

<p>Can be supplied in large precast shapes.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>ALKON® GUN F 50 gunning solution</li>
	<li>CALDE® CAST ML 55 S5/ GUN MM 55 S5 alkali resistant solution</li>
</ul>

Casthouse Holding Furnace G<ul>
	<li>CALDE® CAST MM 55: reference solution when protected by steel plates</li>
	<li>CALDE® CAST LX 58 otherwise</li>
	<li>CALDE® WIRE MIX: in precast shapes for great durability against mechanical abuse and thermal shocks, replacing metal protective plates.</li>
</ul>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>ALKON® GUN F 50 gunning solution</li>
	<li>CALDE® CAST ML 55 S5/ GUN MM 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less severe environment</li>
</ul>

<p>Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>

Casthouse Holding Furnace H<ul>
	<li>CALDE® CAST MM 55: reference solution when protected by steel plates</li>
	<li>CALDE® CAST LX 58 otherwise</li>
	<li>CALDE® WIRE MIX: in precast shapes for great durability against mechanical abuse and thermal shocks, replacing metal protective plates.</li>
</ul>

<p> </p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>

<p> </p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less severe environment</li>
</ul>

<p>Can be supplied in large precast shapes.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>ALKON® GUN F 50 gunning solution</li>
	<li>CALDE® CAST ML 55 S5/ GUN MM 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>

Casthouse Holding Furnace I<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less severe environment</li>
</ul>

<p>Can be supplied in large precast shapes.</p>

Casthouse Holding Furnace J<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>

<p> </p>

Casthouse Holding Furnace K<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>

<p> </p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>

Casthouse Holding Furnace L<ul>
	<li>CALDE® CAST M 28 D HR: reference solution</li>
	<li>CALDE® CAST MW 130 M for lighter solution.</li>
</ul>

<p>Extra insulation can be brought via insulating fibre choice.</p>

<p> </p>
<ul>
	<li>CALDE® CAST XL 116 C/G or CALDE® CAST LW MIX 124 C/G on top of insulating board: reference solution.</li>
</ul>

<p>Versatile and extra insulating. Metallic or ceramic<br />
anchors.</p>

<p> </p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>ALKON® CAST F 35 C/G: reference solution with installation versatility, on top of fibre board</li>
	<li>ALKON® CAST MW 14 C/G for extra insulation</li>
</ul>

<p>A compromise is to be found between low shell<br />
temperature (thermal efficiency), alloy freeze point<br />
position (safety), and furnace capacity (total thickness).</p>
<ul>
	<li>CALDE® CAST M 28 D HR reference solution</li>
	<li>CALDE® CAST LX 58 for extra thermal cycling</li>
	<li>CALDE® CAST ML 55 S5 alkali resistant solution</li>
</ul>
<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST BL 80 B3 for maximum abrasion resistance</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to dross & corrosion</li>
	<li>ALKON® SOL CAST B 85 for quick dry solution</li>
</ul>

<p>Balance between abrasion resistance, corrosion<br />
resistance to be found.<br />
Can be supplied in large precast shapes.</p>