Energy & environment

CFB Boiler

Energy & Environment

CFB Boiler

Calderys has been delivering results to Circulating Fluidised Bed (CFB) boiler operators for decades, with projects all over the world (for both cooled and uncooled technologies) including the Nordic countries, Poland, Germany, India, and China. Discover some samples of our refractory recommendations for CFB boilers for all feedstock types: waste, biomass, and coal.

Circulating Fluidised Bed Boiler A<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler B<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler C<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler D<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler E<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler F<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler G<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler H<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler I<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler J<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler K<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Circulating Fluidised Bed Boiler L<p>For this slag-building area, a smooth surface refractory is recommended, with SiC an important element for waste & biomass boilers.<br />
Casting options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Patching examples for small areas:</p>
<ul>	<li>Keraplan SiC-V-85-E</li>	<li>CALDE® PATCH PS 70</li>
</ul>
<p>This is a critical area of the CFB for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br />
Castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Gunning examples:</p>
<ul>	<li>CALDE® GUN LF 50 A</li>	<li>CALDE® GUN LM 74 A</li>	<li>CALDE® GUN B 85</li>
</ul>
<p>For the powerful sand erosion and chemical vapours in this CFB zone, Calderys experts will partner with you on the optimal refractory solutions.<br />
Many castable options:</p>
<ul>	<li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li>
</ul>
<p>Ramming example:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Here abrasion resistance against turbulence is a key factor for refractory choice.<br />
Castable options include:</p>
<ul>	<li>CALDE® CAST / FLOW 50 A</li>	<li>CALDE® SPRAYCAST SiC or LM 74 A</li>
</ul>
<p>Gunning example:</p>
<ul>	<li>CALDE® GUN LM 74 A</li>
</ul>
<p>Ramming example for small areas:</p>
<ul>	<li>CALDE® PLAST REDD RAM</li>
</ul>
<p>For refractory in this CFB zone the key is to withstand aggressive vapours.<br />
Gunning options recommended for uncooled CFB:</p>
<ul>	<li>CALDE® GUN F 40</li>	<li>CALDE® GUN LF 52 A (particularly for waste feedstock)</li>
</ul>
<p>Diverse linings for cooled CFB:</p>
<ul>	<li>CALDE® SPRAYCAST or GUN ranges</li>	<li>CALDE ® PATCH PS 70 for small areas</li>
</ul>

Calderys has been delivering results to Circulating Fluidised Bed (CFB) boiler operators for decades, with projects all over the world (for both cooled and uncooled technologies) including the Nordic countries, Poland, Germany, India, and China. Discover some samples of our refractory recommendations for CFB boilers for all feedstock types: waste, biomass, and coal.