Primary Aluminium

Potcells With Metal Transfer Ladle

Calderys is a leader in supplying cost effective Silica-Alumina refractory concretes for Aluminium potcells. Main needs are for cathode bar sealings, for cathode levelling and for closing sidewall crowns. Calderys also delivers mortars for all bottom and sidewall bricks, as well as low alumina dense bricks for the safety layer below cathodes. Calderys has long-term approved products by the main potcell technology providers.

Please contact our refractory experts to request a specific brochure on Aluminium Potcells.

Potcells WIth Metal Transfer Ladle A<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80<br />
	 </li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (HYDRO)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.<br />
	 </li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>

Potcells With Metal Transfer Ladle B<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>

Potcells With Metal Transfer Ladle C<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>

Potcells With Metal Transfer Ladle D<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>

Potcells With Metal Transfer Ladle E<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>

Potcells With Metal Transfer Ladle F<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>

Potcells With Metal Transfer Ladle G<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>

Potcells With Metal Transfer Ladle H<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>

Potcells With Metal Transfer Ladle I<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>

Potcells With Metal Transfer Ladle J<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>

Potcells With Metal Transfer Ladle K<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80 </li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>

Potcells With Metal Transfer Ladle L<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: standard self-flowing castable solution. Requires followed dry-out.</li>
	<li>ALKON® FLOW LB 83 FF for upgrade Cast in situ or in precast piece.</li>
	<li>ALKON® CAST MF 52 HR for downgrade Cast in situ or in precast piece.</li>
</ul>

<p>Self-flowing castable solution in walls is providing increased lifetime with easier dross cleaning and maximum ladle capacity.</p>

<p>Requires followed dry-out.</p>

<ul>
	<li>AC 42 D: standard brick solution</li>
</ul>
<ul>
	<li>CALDE®  GUN C 20 (AP) for easy installation </li>
</ul>
<ul>
	<li>CALDE®  TROWEL S 80</li>
</ul>
<p>Products approved for various potcell technologies like RTA AP, Hydro, Alcoa, GAMI, Dubal DX, VAW, Kaiser, etc.</p>

<ul>
	<li>CALDE® CAST BETON N: reference solution (AP, DX)</li>
	<li>CALDE® CAST F 36 G2 (Hydro)</li>
</ul>
<ul>
	<li>ACEMIX DV AL: standard leveling DVM solution. Efficient & cost-effective barrier compared to metallurgical alumina.</li>
	<li>CALDE® DRY F 45 LD G3: dust-free solution. HSE friendly material with better resistance to bath compounds than alumina.</li>
</ul>
<p>Calderys can offer products approved for various potcell technologies like RTA AP, Hydro, Dubal DX, etc.<br />
Barrier brick</p>

<ul>
	<li>AC 30 D AL: reference brick solution available in different sizes (AP, DX)</li>
</ul>

<p>Mortar</p>

<ul>
	<li>CALDE® TROWEL HQ 82 U: ready to use mortar (AP, DX) CALDE® TROWEL HQ 85 U (Hydro) ACEMIX DV AL: reference DVM solution (Gami)</li>
</ul>