Aluminium Foundry

Coreless Induction Furnace

The Coreless Induction Furnace, commonly known as CIF, is an effective furnace type for remelting clean scrap and processing difficult aluminium alloys (such as lithium containing alloys) as well as master alloys. Top performing refractory solutions for this equipment need to strike a balance between the speed of relining and refractory performance.

Multiple refractory installation techniques are possible: the best-known are DVM (dry vibrating mix), wet ramming mass, and precast crucible. Calderys can supply full solutions (products and services) for all CIF areas including coil grout, spout, rings, cover, and any patching repairs.

Please contact our refractory experts to request a specific brochure on Aluminium CIF.

Coreless Induction Furnace A<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>

Coreless Induction Furnace B<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>

Coreless Induction Furnace C<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>

Coreless Induction Furnace D<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>

Coreless Induction Furnace E<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>

Coreless Induction Furnace F<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>

Coreless Induction Furnace G<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>

Coreless Induction Furnace H<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>

Coreless Induction Furnace I<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>

Coreless Induction Furnace J<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>

Coreless Induction Furnace K<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>

<p> </p>
<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>ALKON® CAST LB 85: precast piece</li>
</ul>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>

Coreless Induction Furnace L<ul>
	<li>ALKON® CAST F 35 C/G: cost effective solution</li>
	<li>ALKON® CAST MW 14 C/G: semi-insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: castable solution </li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
	<li>CALDE® CAST LS 85: high performance solution</li>
</ul>
<p>Generally made with the same material as bath</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>CALDE® PLAST P 85: plastic ramming solution</li>
</ul>

<p>ALKON® CAST LB 85: precast piece</p>
<p>4 installation techniques possible depending on the need in speed and cost/performance ratio. </p>

<p>Wet-ramming installation: cost effective but difficult and long to install.</p>

<ul>
	<li>ALKON® RAM PB 70: wet ramming reference solution</li>
	<li>ALKON® RAM PF 45: cost-effective solution</li>
</ul>

<p>Dry-ramming installation: installation is key to performance.</p>

<ul>
	<li>ALKON® DRY BC 90: dry ramming reference solution</li>
</ul>

<p>Cast in-situ solution: high performance but very long dry-out.</p>

<ul>
	<li>ALKON® CAST MM 60: reference solution</li>
</ul>

<p>Large precast shape solution: maximum speed and high performance.</p>

<ul>
	<li>ALKON® CAST LB 85: reference solution</li>
	<li>ALKON® CAST MT 90: high purity solution reinforced with steel fibres with ALKON® DRY SF 40 safety layer</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® CAST LX 58: long lasting castable standard solution</li>
	<li>CALDE® SOL CAST M 60 2CP: quick-dryout sol-bonded solution</li>
</ul>
<ul>
	<li>CALDE® STIX T 90 G1: reference solution for troweling application</li>
	<li>CALDE® FLOW UT 92: self-flowing solution</li>
	<li>MICA or COMBI FOIL as slip plane </li>
</ul>