Aluminium

Transport Ladle

With many refractory solutions possible for the Aluminium transport ladle, Calderys experts are ready to work with you to find the balance between 2 key factors:

  • Thermal insulation to minimise metal temperature loss, and
  • Refractory lifetime to maximise your production output.

While Calderys can provide any type of refractory product adapted to your needs, monolithic solutions provide many key advantages over bricks:

  • More stability than brick linings (geometric stability) for less risk of spalling during mechanical cleaning,
  • Higher ladle capacity possible with monolithics due to the adaptable lining, and
  • Precast (ready-shape) options possible to save time on installation in your shop, maximising productivity.

Calderys will provide you with tailored recommendations on all options for transport ladle linings, including hot face coating, cold repairs, as well as in-house relinings (deliver your ladle to Calderys for the relining — highest installation efficiency), and even on-the-road ladle solutions for aluminium transport with ultra-low thermal loss. Just contact our refractory experts for our advice and for a dedicated brochure on the Aluminium transport ladle.

Transport Ladle H<ul>
	<li>CALDE® CAST MW STRONG LITE or CALDE® CAST MW 130 M: standard solutions</li>
	<li>CALDE® CAST XL 116 C/G: extra insulating solution<br />
	 </li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less strong environment </li>
</ul>
<ul>
	<li>ALKON® CAST MF 44 and ALKON® CAST MF 52 HR: reference solution</li>
	<li>ALKON® CAST MF 40 CFM: insulating dense solution</li>
	<li>ALKON® CAST 204 or ALKON® FLOW LB 75 for large ladle doing alloy treatment</li>
	<li>ALKON® CAST MT 90 for pure aluminium handling</li>
</ul>

<p>Can be supplied in large precast shapes</p>

<p>Ladle walls can be cast as thin as 60mm with self-flowing solutions. Ladle precast piece can be delivered and installed with a dry-vibrating mix filler.<br />
 </p>
<ul>
	<li>ALKON® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.<br />
	 </li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference in large capacity ladle with high metal free fall</li>
	<li>ALKON® CAST BL 80 B3 </li>
</ul>
<p>Insulating boards of various thermal insulation levels</p>

<ul>
	<li>CALDE® CAST XL 116 C/G in thick-walled ladles</li>
	<li>ALKON® DRY SF 40: dry back layer filler with precast shapes<br />
	 </li>
</ul>

Transport Ladle I<ul>
	<li>CALDE® CAST MW STRONG LITE or CALDE® CAST MW 130 M: standard solutions</li>
	<li>CALDE® CAST XL 116 C/G: extra insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less strong environment </li>
</ul>
<ul>
	<li>ALKON® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 44 and ALKON® CAST MF 52 HR: reference solution</li>
	<li>ALKON® CAST MF 40 CFM: insulating dense solution</li>
	<li>ALKON® CAST 204 or ALKON® FLOW LB 75 for large ladle doing alloy treatment</li>
	<li>ALKON® CAST MT 90 for pure aluminium handling</li>
</ul>

<p>Can be supplied in large precast shapes</p>

<p>Ladle walls can be cast as thin as 60mm with self-flowing solutions. Ladle precast piece can be delivered and installed with a dry-vibrating mix filler.</p>
<p>Insulating boards of various thermal insulation levels</p>

<ul>
	<li>CALDE® CAST XL 116 C/G in thick-walled ladles</li>
	<li>ALKON® DRY SF 40: dry back layer filler with precast shapes</li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference in large capacity ladle with high metal free fall</li>
	<li>ALKON® CAST BL 80 B3 </li>
</ul>

Transport Ladle J<ul>
	<li>CALDE® CAST MW STRONG LITE or CALDE® CAST MW 130 M: standard solutions</li>
	<li>CALDE® CAST XL 116 C/G: extra insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less strong environment </li>
</ul>
<ul>
	<li>ALKON® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 44 and ALKON® CAST MF 52 HR: reference solution</li>
	<li>ALKON® CAST MF 40 CFM: insulating dense solution</li>
	<li>ALKON® CAST 204 or ALKON® FLOW LB 75 for large ladle doing alloy treatment</li>
	<li>ALKON® CAST MT 90 for pure aluminium handling</li>
</ul>

<p>Can be supplied in large precast shapes</p>

<p>Ladle walls can be cast as thin as 60mm with self-flowing solutions. Ladle precast piece can be delivered and installed with a dry-vibrating mix filler.</p>
<p>Insulating boards of various thermal insulation levels</p>

<ul>
	<li>CALDE® CAST XL 116 C/G in thick-walled ladles</li>
	<li>ALKON® DRY SF 40: dry back layer filler with precast shapes</li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference in large capacity ladle with high metal free fall</li>
	<li>ALKON® CAST BL 80 B3 </li>
</ul>

Transport Ladle K<ul>
	<li>CALDE® CAST MW STRONG LITE or CALDE® CAST MW 130 M: standard solutions</li>
	<li>CALDE® CAST XL 116 C/G: extra insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less strong environment </li>
</ul>
<ul>
	<li>ALKON® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 44 and ALKON® CAST MF 52 HR: reference solution</li>
	<li>ALKON® CAST MF 40 CFM: insulating dense solution</li>
	<li>ALKON® CAST 204 or ALKON® FLOW LB 75 for large ladle doing alloy treatment</li>
	<li>ALKON® CAST MT 90 for pure aluminium handling</li>
</ul>

<p>Can be supplied in large precast shapes</p>

<p>Ladle walls can be cast as thin as 60mm with self-flowing solutions. Ladle precast piece can be delivered and installed with a dry-vibrating mix filler.</p>
<ul>
	<li>ALKON® CAST 204: reference in large capacity ladle with high metal free fall</li>
	<li>ALKON® CAST BL 80 B3 </li>
</ul>
<p>Insulating boards of various thermal insulation levels</p>

<ul>
	<li>CALDE® CAST XL 116 C/G in thick-walled ladles</li>
	<li>ALKON® DRY SF 40: dry back layer filler with precast shapes</li>
</ul>

Transport Ladle L<ul>
	<li>CALDE® CAST MW STRONG LITE or CALDE® CAST MW 130 M: standard solutions</li>
	<li>CALDE® CAST XL 116 C/G: extra insulating solution</li>
</ul>
<ul>
	<li>ALKON® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 44 and ALKON® CAST MF 52 HR: reference solution</li>
	<li>ALKON® CAST MF 40 CFM: insulating dense solution</li>
	<li>ALKON® CAST 204 or ALKON® FLOW LB 75 for large ladle doing alloy treatment</li>
	<li>ALKON® CAST MT 90 for pure aluminium handling</li>
</ul>

<p>Can be supplied in large precast shapes</p>

<p>Ladle walls can be cast as thin as 60mm with self-flowing solutions. Ladle precast piece can be delivered and installed with a dry-vibrating mix filler.</p>
<p>Insulating boards of various thermal insulation levels</p>

<ul>
	<li>CALDE® CAST XL 116 C/G in thick-walled ladles</li>
	<li>ALKON® DRY SF 40: dry back layer filler with precast shapes</li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference in large capacity ladle with high metal free fall</li>
	<li>ALKON® CAST BL 80 B3 </li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less strong environment </li>
</ul>

Transport Ladle M<ul>
	<li>CALDE® CAST MW STRONG LITE or CALDE® CAST MW 130 M: standard solutions</li>
	<li>CALDE® CAST XL 116 C/G: extra insulating solution</li>
</ul>
<ul>
	<li>ALKON® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 44 and ALKON® CAST MF 52 HR: reference solution</li>
	<li>ALKON® CAST MF 40 CFM: insulating dense solution</li>
	<li>ALKON® CAST 204 or ALKON® FLOW LB 75 for large ladle doing alloy treatment</li>
	<li>ALKON® CAST MT 90 for pure aluminium handling</li>
</ul>

<p>Can be supplied in large precast shapes</p>

<p>Ladle walls can be cast as thin as 60mm with self-flowing solutions. Ladle precast piece can be delivered and installed with a dry-vibrating mix filler.</p>
<ul>
	<li>ALKON® CAST 204: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less strong environment </li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference in large capacity ladle with high metal free fall</li>
	<li>ALKON® CAST BL 80 B3 </li>
</ul>
<p>Insulating boards of various thermal insulation levels</p>

<ul>
	<li>CALDE® CAST XL 116 C/G in thick-walled ladles</li>
	<li>ALKON® DRY SF 40: dry back layer filler with precast shapes</li>
</ul>

Transport Ladle N<ul>
	<li>CALDE® CAST MW STRONG LITE or CALDE® CAST MW 130 M: standard solutions</li>
	<li>CALDE® CAST XL 116 C/G: extra insulating solution</li>
</ul>
<ul>
	<li>ALKON® CAST 204: reference solution</li>
	<li>ALKON® CAST HYMOR 80 AL for extra resistance to strong alloys & flux</li>
	<li>ALKON® CAST MM 60 in less strong environment </li>
</ul>
<ul>
	<li>ALKON® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 44 and ALKON® CAST MF 52 HR: reference solution</li>
	<li>ALKON® CAST MF 40 CFM: insulating dense solution</li>
	<li>ALKON® CAST 204 or ALKON® FLOW LB 75 for large ladle doing alloy treatment</li>
	<li>ALKON® CAST MT 90 for pure aluminium handling</li>
</ul>

<p>Can be supplied in large precast shapes</p>

<p>Ladle walls can be cast as thin as 60mm with self-flowing solutions. Ladle precast piece can be delivered and installed with a dry-vibrating mix filler.</p>
<ul>
	<li>ALKON® CAST 204: reference in large capacity ladle with high metal free fall</li>
	<li>ALKON® CAST BL 80 B3 </li>
</ul>
<p>Insulating boards of various thermal insulation levels</p>

<ul>
	<li>CALDE® CAST XL 116 C/G in thick-walled ladles</li>
	<li>ALKON® DRY SF 40: dry back layer filler with precast shapes</li>
</ul>