Aluminium

Runners & Treatment Box

For this Aluminium foundry area, Calderys is focused on providing you with the highest metal quality by offering refractory solutions for zero metal impurities and chemical pick-up. To avoid hydrogen pick-up, Calderys experts recommend precast (ready-shape) or in-house equipment lining using our trusted monolithic refractories for the most immediate and efficient servicing.

Calderys refractories are designed specifically for liquid aluminium contact with the goal of increasing your equipment lifetime. Key benefits include:

  • Resistance to corrosion
  • Minimal metal temperature loss
  • High mechanical resistance in balance with strong thermal insulation

Our experts will recommend to you the ideal refractory options for all equipment zones (see full details on 3D drawing below), including: Runners or trough, Dam, Weir, Filter box, degassing box, casting table, treatment box, purging plug, and the cover or lid. For the runners in particular, Calderys ensures thermal expansion stability to avoid infiltration and preserve your production.

Please contact our refractory experts for further information and to request a specific brochure on the Aluminium runners and treatment box.

Runners Treatment F<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.<br />
	 </li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.<br />
 </p>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90<br />
	 </li>
</ul>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions<br />
	 </li>
</ul>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature  as low as 50°C can be reached.<br />
	 </li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.<br />
	 </li>
</ul>

Runners Treatment G<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.</p>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90</li>
</ul>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions</li>
</ul>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature  as low as 50°C can be reached.</li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>

Runners Treatment H<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.</p>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90</li>
</ul>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature  as low as 50°C can be reached.</li>
</ul>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions</li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>

Runners Treatment I<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.</p>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90</li>
</ul>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions</li>
</ul>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature  as low as 50°C can be reached.</li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>

Runners Treatment J<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.</li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.</p>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions</li>
</ul>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature  as low as 50°C can be reached.</li>
</ul>

Runners Treatment K<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.</p>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90</li>
</ul>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions</li>
</ul>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature as low as 50°C can be reached.</li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>

Runners Treatment L<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.</li>
</ul>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90</li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.</p>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature as low as 50°C can be reached.</li>
</ul>

Runners Treatment M<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature as low as 50°C can be reached.</li>
</ul>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90</li>
</ul>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.</p>

Runners Treatment N<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.</li>
</ul>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90</li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature as low as 50°C can be reached.</li>
</ul>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.</p>

Runners Treatment O<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.</p>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature as low as 50°C can be reached.</li>
</ul>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions</li>
</ul>

Runners Treatment P<ul>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating and dense cost effective solution</li>
	<li>ALKON® CAST LW 10 C/G: insulating solution for minimum thermal loss</li>
	<li>CALDE® CAST XL 140: extra insulating solution</li>
</ul>

<p>Precast solution available. Protective coating is recommended to maximize lifetime and ensure metal quality. </p>
<ul>
	<li>CALDE® PATCH OZ 93 U: glass coating for easier aluminium skulls removal, to renew monthly.</li>
	<li>ALKON® PATCH PT 85 U: solution for thin repairs or protective layer and also for coat expansion, joint ceramic fiber paper to avoid  metal infiltration</li>
	<li>CALDE® PATCH BN: boron nitride solution (blue and white color) for high quality alloy, to renew frequently for casting runners.</li>
</ul>
<ul>
	<li>ALKON® FLOW LB 75: reference solution with self-flowing properties to cast in one time</li>
	<li>ALKON® CAST MT 90: high corrosion resistance solution</li>
	<li>ALKON® CAST LV 75: fused silica solution for high thermal shock/cycling resistance</li>
</ul>

<p>In house service available to deliver you a treatment box ready to use.</p>
<ul>
	<li>CALDE® CAST LS 85: reference solution</li>
	<li>ALKON® CAST LV 75: fused silica</li>
	<li>ALKON® CAST MT 90</li>
</ul>
<ul>
	<li>Several solutions with porous or slotted plugs to select based on needed gas flow rate</li>
	<li>Changeable plug solutions</li>
</ul>
<ul>
	<li>Aluminium infiltration barriers.</li>
	<li>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up. Shell temperature as low as 50°C can be reached.</li>
</ul>
<ul>
	<li>ALKON® CAST LM 68 and ALKON® CAST 204: reference solutions</li>
	<li>CALDE® CAST LS 60 and CALDE® CAST LS 85 for maximum thermal shock resistance in first sections</li>
	<li>ALKON® CAST LV 75: fused silica solution for high volume stability and thermal cycling resistance</li>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense cost effective solution</li>
</ul>

<p>Precast solution available.</p>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>
<ul>
	<li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li>
	<li>CALDE® CAST XL 116 C/G or ALKON® CAST LW 10 C/G: together with insulating fiber if not heated.</li>
</ul>