Reheat furnaces

Roller Furnace

Iron & Steel

Roller Furnace

The roller hearth conveyor system consists of a series of externally driven rolls. There are no cumulative conveyor pressures or tensions as in belt, chain or pusher furnaces. As a result, there are no production or cycle limitations and furnace length is dependent only upon your application needs. Because individual conveyor rolls are externally driven and remain in the same temperature zones, they are not subject to thermal cycling and can be designed for maximum operation life at working temperatures. You will find below a brief description of our range.

Roller Furnace A<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Standard working conditions</p>
<ul>	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60</li>	<li>CALDE® CAST NA 55 QD</li>	<li>CALDE® PLAST SUPERAL AB</li>
</ul>
<p>For higher working temperature</p>
<ul>	<li>CALDE® CAST LM 70</li>	<li>CALDE® CAST NM 60 QD</li>	<li>CALDE® PLAST SUPERAL X AB</li>
</ul>
<p>Precast solutions are also available.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A<br />	 </li>
</ul>

Roller Furnace B<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 7</li>
</ul>
<p>Standard working conditions</p>
<ul>	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60</li>	<li>CALDE® CAST NA 55 QD</li>	<li>CALDE® PLAST SUPERAL AB</li>
</ul>
<p>For higher working temperature</p>
<ul>	<li>CALDE® CAST LM 70</li>	<li>CALDE® CAST NM 60 QD</li>	<li>CALDE® PLAST SUPERAL X AB</li>
</ul>
<p>Precast solutions are also available.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A</li>
</ul>

Roller Furnace C<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Standard working conditions</p>
<ul>	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60</li>	<li>CALDE® CAST NA 55 QD</li>	<li>CALDE® PLAST SUPERAL AB</li>
</ul>
<p>For higher working temperature</p>
<ul>	<li>CALDE® CAST LM 70</li>	<li>CALDE® CAST NM 60 QD</li>	<li>CALDE® PLAST SUPERAL X AB</li>
</ul>
<p>Precast solutions are also available.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A</li>
</ul>

Roller Furnace D<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Standard working conditions</p>
<ul>	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60</li>	<li>CALDE® CAST NA 55 QD</li>	<li>CALDE® PLAST SUPERAL AB</li>
</ul>
<p>For higher working temperature</p>
<ul>	<li>CALDE® CAST LM 70</li>	<li>CALDE® CAST NM 60 QD</li>	<li>CALDE® PLAST SUPERAL X AB</li>
</ul>
<p>Precast solutions are also available.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A</li>
</ul>

Roller Furnace E<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Standard working conditions</p>
<ul>	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60</li>	<li>CALDE® CAST NA 55 QD</li>	<li>CALDE® PLAST SUPERAL AB</li>
</ul>
<p>For higher working temperature</p>
<ul>	<li>CALDE® CAST LM 70</li>	<li>CALDE® CAST NM 60 QD</li>	<li>CALDE® PLAST SUPERAL X AB</li>
</ul>
<p>Precast solutions are also available.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A</li>
</ul>

Roller Furnace F<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Standard working conditions</p>
<ul>	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60</li>	<li>CALDE® CAST NA 55 QD</li>	<li>CALDE® PLAST SUPERAL AB</li>
</ul>
<p>For higher working temperature</p>
<ul>	<li>CALDE® CAST LM 70</li>	<li>CALDE® CAST NM 60 QD</li>	<li>CALDE® PLAST SUPERAL X AB</li>
</ul>
<p>Precast solutions are also available.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A</li>
</ul>

Roller Furnace G<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Standard working conditions</p>
<ul>	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60</li>	<li>CALDE® CAST NA 55 QD</li>	<li>CALDE® PLAST SUPERAL AB</li>
</ul>
<p>For higher working temperature</p>
<ul>	<li>CALDE® CAST LM 70</li>	<li>CALDE® CAST NM 60 QD</li>	<li>CALDE® PLAST SUPERAL X AB</li>
</ul>
<p>Precast solutions are also available.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A</li>
</ul>

Roller Furnace H<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Standard working conditions</p>
<ul>	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60</li>	<li>CALDE® CAST NA 55 QD</li>	<li>CALDE® PLAST SUPERAL AB</li>
</ul>
<p>For higher working temperature</p>
<ul>	<li>CALDE® CAST LM 70</li>	<li>CALDE® CAST NM 60 QD</li>	<li>CALDE® PLAST SUPERAL X AB</li>
</ul>
<p>Precast solutions are also available.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A</li>
</ul>

Roller Furnace I<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A</li>
</ul>

Roller Furnace J<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A</li>
</ul>

Roller Furnace K<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50</li>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:</p>
<ul>	<li>CALDE® CAST NA 55 QD / CALDE® SOL CAST GIBRAM F 48</li>
</ul>
<p> <br />
Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32</li>	<li>CALDE® CAST GIBRAM / CALDE® CAST LX 68</li>
</ul>
<p><br />
Quick Drying and Sol-Gel solutions are available:  </p>
<ul>	<li>CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD</li>	<li>CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST M 74 A</li>
</ul>

Roller Furnace L<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR</li>	<li>CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</p>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>
<p>Preheating zone (Temperature < 1100°C)</p>
<ul>	<li>CALDE® CAST MW 142 / CALDE® CAST M 23</li>	<li>CALDE® CAST M 28 HR / CALDE® CAST MA 55</li>	<li>CALDE® PLAST SUPERAL AB</li>	<li>CALDE® GUN M 60</li>
</ul>
<p>Heating zone (Temperature > 1100°C)</p>
<ul>	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60</li>	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70</li>	<li>CALDE® PLAST SUPERAL X AB</li>	<li>CALDE® GUN SUPERAL X 70</li>
</ul>

The roller hearth conveyor system consists of a series of externally driven rolls. There are no cumulative conveyor pressures or tensions as in belt, chain or pusher furnaces. As a result, there are no production or cycle limitations and furnace length is dependent only upon your application needs. Because individual conveyor rolls are externally driven and remain in the same temperature zones, they are not subject to thermal cycling and can be designed for maximum operation life at working temperatures. You will find below a brief description of our range.

We conduct an extensive audit of your process to design a customised solution from the insulating castables, precast shapes and large range of ceramic anchors in our monolithics portfolio.