Reheat Furnaces

Walking Beam Furnace

Walking Beam furnaces are the most advanced type of furnaces for the reheating of heavy and thick products. The temperature is generally around 1250°C but can reach 1450°C in some cases. Calderys has a full range of solutions: cast-in situ, plastic to cast/gun/ram, Quick Drying and Sol-Gel, Spraycast or Precast.

Walking Beam Furnace A<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>

<ul>
</ul>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>

Walking Beam Furnace B<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.</p>

<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace C<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p> </p>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>

Walking Beam Furnace D<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace E<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® CAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case or superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case or superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p> Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case or superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® CAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case or superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace F<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® CAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case or superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case or superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case or superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® CAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case or superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace G<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace H<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace I<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace J<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace K<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace L<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace M<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p> Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace N<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>​​​​</p>

<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace O<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>

Walking Beam Furnace P<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace Q<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>

Walking Beam Furnace R<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door,<br />
thermocouple sleeves ...</p>
<p>Skids and posts are submitted to several stresses: corrosion, abrasion, mechanical and flame impact.<br />
Several options are available: cast in-situ, precast, gunning.<br />
Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28 HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® FLOW LF 45</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® GUN SUPERAL X 70 and CALDE® STIX 16 can be used successfully for repairs</li>
</ul>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST AF 470 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST M 32 in case of more severe conditions</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Several precast pieces are available for the skids<br />
and posts passage and sub hearth</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPERAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Full Precast roof solutions are available</p>