Reheat Furnaces

Walking Hearth Furnace

Walking Hearth furnaces allow the transportation and reheating of different sizes of material. Unfortunately, the back-face of the stock cannot be heated so that the stock residence time may be long. Consequently, the corrosion by scaling becomes important as well as abrasion. The temperature is generally around 1250°C. Calderys has a full range of solutions: cast-in situ, plastic to cast/gun/ram, Quick Drying and Sol-Gel, Spraycast or Precast.

Walking Hearth Furnace A<p>Preheating zone:</p>

<ul>
	<li>CALDE® AST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>

Walking Hearth Furnace B<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>

Walking Hearth Furnace C<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>

Walking Hearth Furnace D<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and SolGel solution are available: CALDE® CAST NA 55 QD / CALDE® SOL CASTF 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST Gibram / CALDE® CAST LX 68 in case of more severe</li>
	<li>Quick Drying Solution and SolGel solution are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® CAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case or superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>

Walking Hearth Furnace E<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>

Walking Hearth Furnace F<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>

Walking Hearth Furnace G<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>

Walking Hearth Furnace H<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>

Walking Hearth Furnace I<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>

Walking Hearth Furnace J<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>

Walking Hearth Furnace K<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>

Walking Hearth Furnace L<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST M 28HR / CALDE® CAST LF 44 / CALDE® CAST LX 50 / CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LX 58 in standard working conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NA 55 QD / CALDE® SOL CAST F 48</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST LX 58 / CALDE® CAST AF 470 / CALDE® CAST M 32 HR / CALDE® CAST GIBRAM / CALDE® CAST LX 68 in case of more severe conditions</li>
	<li>Quick Drying Solution and Sol-Gel solutions are available: CALDE® CAST NB 82 QD / CALDE® CAST NT 92 QD / CALDE® SOL CAST B 86 G10 / CALDE® SOL SPRAYCAST LM 74 A</li>
</ul>

<p>Several precast pieces are available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 can be used successfully for roof repair and nose installation</li>
	<li>CALDE® CAST LB 70 C/R: plastic to cast for roof repair.</li>
</ul>

<p>Full Precast roof solutions are available.</p>
<ul>
	<li>CALDE® CAST LA 55 / CALDE® CAST LM 60 / CALDE® GUN M 60 / CALDE® PLAST SUPERAL AB / CALDE® CAST NA 55 QD in standard working conditions</li>
	<li>CALDE® CAST NM 60 QD / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB / CALDE® GUN SUPEREAL X 70 in case of superior thermal cycling and higher working temperature</li>
</ul>

<p>Precast solutions are also available</p>
<p>Preheating zone:</p>

<ul>
	<li>CALDE® CAST MW 142 / CALDE® CAST M 23 / CALDE® CAST M 28 HR in standard working conditions</li>
	<li>CALDE® PLAST SUPERAL AB / CALDE® CAST LM 60 / CALDE® CAST MA 55 in case of superior thermal cycling</li>
	<li>CALDE® GUN M 60 is the best value in use solution</li>
</ul>

<p>Heating zone:</p>

<ul>
	<li>CALDE® CAST M 30 / CALDE® CAST 1560 / CALDE® CAST LM 60 in standard working conditions</li>
	<li>CALDE® CAST LX 58 / CALDE® CAST LM 70 / CALDE® PLAST SUPERAL X AB in case of superior thermal cycling</li>
	<li>CALDE® SOL SPRAYCAST M 74 A as pumpable and quick drying solution</li>
	<li>CALDE® GUN SUPERAL X 70 is the best value in use solution</li>
</ul>

<p>Insulation:</p>

<ul>
	<li>We can provide a full range of insulating solutions: Medium Weight (MW) / Light Weight (LW) / Extra Light weight (XL) answering your need and combining both high insulating features and mechanical strength.</li>
</ul>

<p>Precast solutions are also available for any part: inspection door, thermocouple<br />
sleeves ...</p>